Navigation bar
  Start Previous page  14 of 34  Next page End Home  4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24  

Remove the seat track assembly with the
seat attached. Dismount the relay panel and
control switch panel from the seat frame.
Take out the clevis pin that fastens the
vertical adjuster to the seat frame. Detach the
horizontal adjuster from the seat frame.
Remove the four nuts that hold the seat frame
to the seat tracks and remove the frame.
Position the seat frame on the seat tracks. Assemble the relay panel and
control switch panel to the seat frame.
Assemble the vertical and horizontal adjusters to the seat frame brackets.
Install the seat frame to the tracks. Install the four stud bolts that hold the
seat tracks to the floor pan.
Horizontal Adjuster
Disconnect the battery ground cable.
Remove the seat shields and the seat back.
Disconnect the seat adjuster from the floor
pan. Detach the seat track assembly from the
floor pan and tilt the seat backward.
Disconnect the motor wires at the bullet
connector. Disconnect the motor ground
wire. Remove the clevis pin that holds the
adjuster to the seat frame bracket and
remove the adjuster.
Seat Frame
Previous page Top Next page